Introduction
In
recent years, shuttle mover system has developed into a flexible,
easy-to-use, energy-saving and environmentally-friendly new delivery
equipment in logistics industry. Through the organic combination and
reasonable application of shuttle mover + radio shuttle with dense
warehouses, It can better adapt to the development and changing needs of
enterprises.
Shuttle Mover System
Different
from AS/RS, shuttle mover system is an innovative fully automated
intensive warehouse, which realizes greater utilization of warehouse
space and can meet greater efficiency requirements of inbound and
outbound.
Main working principle:
1.
Inbound: After WMS receives the information of inbound goods, it
allocates cargo space based on the goods characteristics, and generates
inbound instructions. WCS dispatches related equipment to automatically
deliver goods to the designated location;
2.
Outbound: After WMS receives the information of outbound goods; it
generates outbound instructions according to cargo positions. WCS
dispatches related equipment to automatically send goods to the outbound
end.
Operation type:
Freely
loading and unloading by taking sub-lane as storage unit, and main-lane
as transport path; according to lanes layout, it can be divided into:
two-side layout and middle layout.
□ Shuttle mover and rails are arranged on both sides of racking:
· Radio shuttle mode: first in first out (FIFO);
· Inbound and outbound methods: single-sided inbound and outbound;
□ Shuttle mover and rails are arranged in the middle of racking:
· Radio shuttle mode: first in last out (FILO);
· Inbound and outbound methods: inbound and outbound on one side
System advantages:
1. The perfect combination of intensive storage and automation system;
2. Fully automated storage of bulk pallets;
3.
The semi-automatic raido shuttle rack can be systematically upgraded,
to be interconnected with production and logistics system to achieve
seamless connection.
4. Low requirements for warehouse building pattern and floor height inside the warehouse;
5. The warehouse layout is flexible, with multiple floors and regional layouts to realize fully automated storage;
Customer Introduction
Recently,
NANJING INFORM STORAGE EQUIPMENT (GROUP) CO.,LTD and Inner Mongolia
Chengxin Yong'an Chemical Co., Ltd. signed a cooperation agreement on
the design, manufacture, installation and commissioning of an automated
warehouse system. The project adopts shuttle mover system solution,
which is mainly composed of drive in racking, radio shuttle, shuttle
mover, reciprocating elevators, layer changing elevators, conveyor
lines, and software.
Inner
Mongolia Chengxin Yong'an Chemical Co., Ltd. was established in
November 2012 with a registered capital of 100 million RMB. It is a
high-tech enterprise engaged in the production, operation and research
and development of downstream fine chemical products of natural gas. The
company is located at the northern end of Lantai Road, Alxa Economic
Development Zone, Alxa League, Inner Mongolia, and currently employs 200
people.
The
company has domestic and foreign advanced production equipment,
inspection and testing equipment, high-quality management, production,
inspection personnel and mature production technology. Product quality
has reached the international advanced level.
Project Overview
In
this project, pallets are stored by shuttle mover system. Total
warehouse area is 3000 square meters. The plan has 6 levels of racking
and 6204 cargo spaces, by 1 shuttle mover lane, 4 sets of shuttle mover +
radio shuttle, 3 sets of pallet elevators, 1 set of shuttle mover
elevator, and conveying equipment, to realize the automated inbound and
outbound. The pallet labels are all barcoded for information management,
and external dimension detection and weighing are provided before
storage to ensure safe inbound.
System operation capacity: 5 pallets/hour for inbound (24 hours), and 75 pallets/hour for outbound (8 hours).
Project Benefits
1.
The stored goods are cyanide. It's an unmanned warehouse, requiring
zero or very low failures of storage equipment to prevent people from
entering and leaving the warehouse to overhaul the equipment and contact
with hazardous chemicals;
2.
The warehouse working hours are 24H. It is connected to the production
line, requiring zero or very low failures of storage equipment to avoid
affecting the production line;
3. Dense storage makes full use of warehouse space.
4.
Warehouse inbound and outbound position are flexible. The project
warehouse is long strip, inbound and outbound positions are respectively
in the middle of the warehouse. By adopting shuttle mover system, it
can meet the customer's requirements for inbound and outbound position
with the least line , which can't be realized by conventional AS/RS.
Through WMS/WCS, fully automated operation of radio shuttle, shuttle mover, elevator, conveyor and other equipment is realized, forklift channels and auxiliary spaces are eliminated, greatly improving the density of materials, saving the time for forklifts to access materials, reducing working hours of operators, at the same time meeting the requirements of customers for high-density storage and high-efficiency access to materials.
Why choose us?
Top 3 Racking Suppler In China
The Only One A-share Listed Racking Manufacturer
1. NanJing Inform Storage Equipment Group,as a public listed state controlled enterprise, specialized in the logistic storage solution field since 1997.( 27 years of experience)
2.Core Business: Racking
Strategic Business:Automatic System Integration
Growing Business: Warehouse Operation Service
3.Inform owns 6 factories, with over 1000 employees. Inform listed A-share on June 11, 2015, stock code: 603066, becoming the first listed company in China’s warehousing industry.
Q1: What’s your trading terms?
1) Payment terms: As general, T/T 30% deposit after order confirmed, 70% balance paid against BL. L/C also available.
2) Shipping port: Shanghai / Nanjing port China.
3) Discounts: we will offer the biggest discount for large quantity.
Q2: Are you a factory or trading company?
A:We are factory and have 5 factories.We’ve been in the market of logistic storage solutionssince 1997.We design,manufacture racking and assemble shuttle, four-way shuttle etc by ourselves.
Q3: Do you have OEM products to sell?
A:Yes.Both OEM and ODM are available .
Q4:Do you have the minimum order requirements?
A:Any quantity and customized design is acceptable.
Q5:Are samples available?
A:Yes. Short sections of samples can be provided for free, but the international transportation will be at the customers’ expense.
Q6:What’s the delivery time?
A:It depends on the order quantity and racking types. Generally speaking, for the standard pallet racking, it will be within 20 days.